>>><<<Description:
The M5Stack BASIC is a black development kit based on ESP32 chip composed of a black M5Core and a Bottom Baseboard. You can even program The M5Stack BASIC through Blockly, or MicroPython. The black core is a basic kit and it does not own any MEMS chip(like MPU9250...).
The Bottom board on the back of M5Core. It's designed for expanding gpio on M-Bus besides I2S Pins(GPIO0, GPIO12, GPIO13, GPIO15, GPIO34)for DIY. Each gpio on M-Bus is expanded as pin and port for convenience and flexibility.
Notice:
1) Basic kit have no IMU sensor inside
2) GPIO0, GPIO12, GPIO13, GPIO15, GPIO34, pins that related to I2S are not extended out
Product Features:
5V DC power supply
USB Type-C
ESP32-based
4 MByte flash + 520K RAM
Speaker, 3 Buttons, LCD(320*240), 1 Reset
2.4G Antenna: Proant 440
TF card slot (16G Maximum size)
Battery Socket & 110 mAh Lipo Battery
Extendable Pins & Holes
Grove Port
M-Bus Socket & Pins
ESP32 Features:
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
Hall sensor
10x capactive touch interface
32 kHz crystal oscillator
PWM/timer input/output available on every GPIO pin
SDIO master/salve 50MHz
SD-card interface support
Resources | Parameter |
ESP32 | 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth |
Flash Memory | 4MB |
Power Input | 5V @ 500mA |
Port | TypeC x 1, GROVE(I2C+I/0+UART) x 1 |
LCD Screen | 2 inch, 320x240 Colorful TFT LCD, ILI9342C |
Speaker | 1W-0928 |
Battery | 110mAh @ 3.7V |
Operating Temperature | 32°F to 104°F ( 0°C to 40°C ) |
Size | 54 x 54 x 12.5 mm |
Case Material | Plastic ( PC ) |
Package includes:
1 x M5Stack BASIC
1 x M5Stack BASIC Bottom
1 x Type-C USB Cable
1 x User Manual