Features:Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)Product Size: 64mmx20mmx3.4mmMaterial:MetalCharging voltage: 12.6VMaximum output current: 20AMaximum output power / charging power: 252W
Note:1. Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip.2. After connection,it need to first charge activation, then will have the output.3. Do not mix the good battery and poor battery to use.The internal resistance of 3 battery capacity are closer will be better.Please buyers know the professional knowledge of this module before buyingPackage Included:5 x PCB Protection Board
| Electrical Parameters | ||||
| Item | Minimum | Typical | Maximum | Unit |
| Consumable Current | 12 | 18 | 24 | uA |
| Over charge protection voltage | 4.2 | 4.25 | 4.3 | V |
| Over charge recovery voltage | 4.1 | 4.16 | 4.2 | V |
| Over charge delay time | 500 | 1000 | 1500 | ms |
| Over discharge protection voltage | 2.35 | 2.5 | 2.7 | V |
| Over discharge recovery voltage | 2.9 | 3.2 | 3.3 | V |
| Over discharge delav time | 50 | 100 | 150 | ms |
| Conduction resistance | 10 | 12 | 14 | mΩ |
| Overcurrent protection current | 37 | 40 | 43 | A |
| Ovcrcurrcnt delay time | 5 | 10 | 15 | ms |
| Normal operating current | 0 | 20 | 20 | A |
| Transient current (<10ms) | 18 | 20 | 22 | A |
| Ambient temperature | -40 | 25 | 85 | °C |